Domestic Air Conditioning Installation in Ealing

Domestic air conditioning installation in Ealing runs from a single wall-split in one bedroom to a multi-split system serving the whole house from one condenser. Every domestic install includes a heat-load calculation, MCS 020 acoustic check, Part P certification and a 5-year parts & labour warranty.

We sell the units and arrange installation in Ealing (W5, W13) with local F-Gas certified installers. Call to discuss your system, check survey availability and receive a written quote.

Home air conditioning installation in Ealing starts at £1,850 for a single bedroom wall-split system, fully installed and commissioned. Multi-split systems covering three bedrooms and a living room in a typical Ealing family home sit between £5,850 and £8,500. All prices are fixed at the survey — no on-site supplements, no day-rate creep.

Every Ealing quote is issued in writing within 48 hours of the site survey. 92% of our jobs complete at the originally quoted figure — the remaining 8% are almost always scope changes requested by the customer on the day (extra rooms added, upgraded controls, etc.), and are agreed and priced before any additional work starts.

Ealing is west London's 'Queen of the Suburbs' with grand Edwardian villas and modern apartment blocks. That matters for air conditioning design: refrigerant pipe runs, condenser positioning and cable routes all depend on the property type on the day. A survey can assess the property, installation route and system sizing before a written quote is prepared for a Ealing address.

For period properties in Ealing, we favour chased pipe runs behind plasterwork so the finished installation is invisible from the room. For modern flats and new-build stock, trunked runs to a shared external condenser location are usually more practical and keep the party-wall detail intact. Either way, the pipe route is agreed with you on the survey, not decided on install day.

Planning rules across Ealing generally allow external condensers under permitted development on rear or side elevations, provided the unit sits below 0.6 m³, is more than 1 m from the boundary and does not exceed 42 dB(A) at the neighbour's window. For conservation-area or listed properties in Ealing, we manage the full planning application including acoustic assessment and elevation drawings — typical determination is 8 weeks.

1. Free site survey. A qualified engineer attends the Ealing property within 3–5 working days, takes measurements, discusses pipe routes and condenser placement, and takes photographs for the design pack.

2. Written fixed-price quote. You receive a detailed proposal within 48 hours covering equipment, pipework, electrical work, planning support (if required), warranty terms and a fixed installation date.

3. Installation. Most single-split systems in Ealing are completed in a single day. Multi-split and commercial systems take 2–7 days depending on scope. Dust sheets, floor protection and end-of-day tidying are standard.

4. Commissioning & handover. We commission the system to manufacturer specification, hand over the F-Gas registration certificate, warranty documents, remote controls and app setup, and walk you through basic maintenance.