Air Conditioning Installers in Merton

Domestic air conditioning installation in Merton runs from a single wall-split in one bedroom to a multi-split system serving the whole house from one condenser. Qualifying homes are zero-rated for VAT on air-to-air heat pump systems, and every domestic install includes a heat-load calculation, MCS 020 acoustic check, Part P certification and a 5-year parts & labour warranty.

The AC installers working in Merton are directly employed, City & Guilds 2079 F-Gas certified and REFCOM registered — never subcontracted. If you are searching for aircon installers near me, we survey across SW19, SW20 within 3–5 working days and install within a fortnight of sign-off.

Air conditioning installation in Merton starts at £1,850 for a single-room wall-split, fitted and commissioned. Multi-zone systems for larger Merton properties usually sit between £4,500 and £8,500. Every quote is fixed in writing at survey, with no on-site supplements.

Every Merton quote is issued in writing within 48 hours of the site survey. 92% of our jobs complete at the originally quoted figure — the remaining 8% are almost always scope changes requested by the customer on the day (extra rooms added, upgraded controls, etc.), and are agreed and priced before any additional work starts.

Merton is a south-west London borough covering Wimbledon, Morden and Mitcham. That matters for air conditioning design: refrigerant pipe runs, condenser positioning and cable routes all depend on the property type on the day. Our surveyors have installed across every stock type in the SW19, SW20 postcodes — from Victorian terraces and 1930s semis through to modern apartment blocks and Cat A commercial fit-outs — so the design we propose reflects what actually works in Merton, not a generic template.

For period properties in Merton, we favour chased pipe runs behind plasterwork so the finished installation is invisible from the room. For modern flats and new-build stock, trunked runs to a shared external condenser location are usually more practical and keep the party-wall detail intact. Either way, the pipe route is agreed with you on the survey, not decided on install day.

Planning rules across Merton generally allow external condensers under permitted development on rear or side elevations, provided the unit sits below 0.6 m³, is more than 1 m from the boundary and does not exceed 42 dB(A) at the neighbour's window. For conservation-area or listed properties in Merton, we manage the full planning application including acoustic assessment and elevation drawings — typical determination is 8 weeks.

1. Free site survey. A qualified engineer attends the Merton property within 3–5 working days, takes measurements, discusses pipe routes and condenser placement, and takes photographs for the design pack.

2. Written fixed-price quote. You receive a detailed proposal within 48 hours covering equipment, pipework, electrical work, planning support (if required), warranty terms and a fixed installation date.

3. Installation. Most single-split systems in Merton are completed in a single day. Multi-split and commercial systems take 2–7 days depending on scope. Dust sheets, floor protection and end-of-day tidying are standard.

4. Commissioning & handover. We commission the system to manufacturer specification, hand over the F-Gas registration certificate, warranty documents, remote controls and app setup, and walk you through basic maintenance.