VRV & VRF Installation in Putney

Domestic air conditioning installation in Putney runs from a single wall-split in one bedroom to a multi-split system serving the whole house from one condenser. Every domestic install includes a heat-load calculation, MCS 020 acoustic check, Part P certification and a 5-year parts & labour warranty.

The AC installers working in Putney are directly employed, City & Guilds 2079 F-Gas certified and REFCOM registered — never subcontracted. If you are searching for aircon installers near me, we survey across SW15 within 3–5 working days and install within a fortnight of sign-off.

Commercial air conditioning installation in Putney is quoted per zone. A single-cassette office fit-out typically sits between £4,850 and £6,850 fully installed. Four-pipe VRF systems serving 8–12 zones across a mid-sized Putney office floorplate usually land between £38,000 and £62,000, depending on refrigerant pipe runs and any structural steelwork needed for the external condenser.

Every Putney quote is issued in writing within 48 hours of the site survey. 92% of our jobs complete at the originally quoted figure — the remaining 8% are almost always scope changes requested by the customer on the day (extra rooms added, upgraded controls, etc.), and are agreed and priced before any additional work starts.

Putney is an affluent south-west London riverside area of Edwardian mansion blocks and Victorian terraces. That matters for air conditioning design: refrigerant pipe runs, condenser positioning and cable routes all depend on the property type on the day. Our surveyors have installed across every stock type in the SW15 postcodes — from Victorian terraces and 1930s semis through to modern apartment blocks and Cat A commercial fit-outs — so the design we propose reflects what actually works in Putney, not a generic template.

For period properties in Putney, we favour chased pipe runs behind plasterwork so the finished installation is invisible from the room. For modern flats and new-build stock, trunked runs to a shared external condenser location are usually more practical and keep the party-wall detail intact. Either way, the pipe route is agreed with you on the survey, not decided on install day.

Commercial installs in Putney frequently require landlord licence-to-alter, Part L2 compliance evidence and, where the building is listed or in a conservation area, planning consent for external condensers. We prepare the licence-to-alter pack, coordinate with the landlord's M&E consultant and manage the planning application in-house so the programme is not held up.

1. Free site survey. A qualified engineer attends the Putney property within 3–5 working days, takes measurements, discusses pipe routes and condenser placement, and takes photographs for the design pack.

2. Written fixed-price quote. You receive a detailed proposal within 48 hours covering equipment, pipework, electrical work, planning support (if required), warranty terms and a fixed installation date.

3. Installation. Most single-split systems in Putney are completed in a single day. Multi-split and commercial systems take 2–7 days depending on scope. Dust sheets, floor protection and end-of-day tidying are standard.

4. Commissioning & handover. We commission the system to manufacturer specification, hand over the F-Gas registration certificate, warranty documents, remote controls and app setup, and walk you through basic maintenance.